
Sporlan 3-ton R-410A TXV
Externally equalized 3-ton thermostatic expansion valve for R-410A coils. Confirm the tonnage and the connection style before it gets brazed in.
As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure
Loading the stock list…
One Stop Shop Stock
TXVs, liquid-line driers, sight glasses, solenoids, and ball valves.
Category filters
10 parts in Refrigeration Parts

Externally equalized 3-ton thermostatic expansion valve for R-410A coils. Confirm the tonnage and the connection style before it gets brazed in.

Externally equalized 2-ton R-410A TXV for the smaller coils. A 3-ton valve on a 2-ton coil is not a close match.

Liquid-line Catch-All for a typical residential split. Replace the drier every time the system is open. That is the whole point of stocking them.

Higher-capacity Catch-All for longer line sets and light commercial liquid lines. Keep a few beside the C-083 bin.

Liquid-line sight glass with a moisture indicator. Bubbles are not automatically low charge, but a yellow indicator is moisture. Know which one you are looking at.

Bi-flow drier for heat pumps, where flow reverses. A standard liquid-line drier on a heat pump is the wrong part.

Flare ball valve for isolating a gauge set or a recovery setup without dumping the hoses. One per truck, extras in the cage.

Normally closed refrigerant solenoid for pump-down and liquid-line control. Match the coil voltage before you wire it to 24 volts and hope.

Bolt-on power element for Chatleff-style R-410A valves. Sometimes the power head is the failure, and the valve body can stay.

Flare sight glass for a temporary or service-port install when you need to see the liquid and you are not brazing today.