
1/4 x 3/8 mini-split line set, 25 ft
Insulated mini-split line set, 1/4 inch liquid and 3/8 inch suction, 25 feet. The length that finishes a single-zone without a coil of leftover copper in the truck.
As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure
Loading the stock list…
One Stop Shop Stock
Line sets, soft copper, flare fittings, brazing rod, and a torch that lights.
Category filters
12 parts in Copper & Fittings

Insulated mini-split line set, 1/4 inch liquid and 3/8 inch suction, 25 feet. The length that finishes a single-zone without a coil of leftover copper in the truck.

Insulated conventional line set for a typical residential split. Check the suction size on the existing unit before you unroll it.

Fifty feet of 3/8 inch refrigeration-grade soft copper for repairs that should not be made from a cut-up line set.

5/8 inch soft copper for suction-line repairs on smaller splits. Keep the ends capped so the cage coil stays clean.
Flare nuts and unions from 1/4 through 5/8 inch. Mini-splits leak at tired flares, and the fix is a new nut and a proper flare, not more torque.

Brass access tee for a service port where the factory did not leave you one. Depress the core, braze or flare it in, and replace the core when you are done.

Replacement Schrader cores for access ports. A leaking core is not a low charge. Change the core before you add refrigerant.

Silver-bearing solder for the joints where brazing heat is a bad idea, including a lot of mini-split and repair work. It is solder, not a substitute for a nitrogen purge.

15 percent silver brazing alloy for copper-to-copper refrigerant joints. Flow it with nitrogen moving through the line.

Flux for the joints that need it, especially copper to brass. Do not use it as a bandage for a dirty tube.

Self-lighting air-acetylene torch for brazing line sets and repair couplings. Keep a full MC tank in the cage so the truck tank is not the only one.
Wrot copper couplings for 3/8 inch liquid-line repairs. Ream the tube. A ridge inside a coupling is how you restrict a system you just fixed.