
1/4 HP 1075 RPM condenser fan motor
208-230 volt, 1/4 horsepower, 1075 RPM condenser fan motor with a reversible rotation plug. The motor you change when the blade spins free and the compressor is fine.
As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure
Loading the stock list…
One Stop Shop Stock
Condenser fan motors, blower motors, ECM replacements, blades, and wheels.
Category filters
10 parts in Motors & Fans

208-230 volt, 1/4 horsepower, 1075 RPM condenser fan motor with a reversible rotation plug. The motor you change when the blade spins free and the compressor is fine.

208-230 volt, 1/6 horsepower condenser fan motor for the smaller residential condensers. Do not substitute a 1/4 and hope the mount lines up.

Rescue motor that covers a band of horsepower and rotation so one box can finish the call. Read the wiring chart on the carton before it goes on the truck.

115 volt, 1/2 horsepower direct-drive blower motor for furnaces and air handlers. Confirm rotation and capacitor size before you button the panel up.

Evergreen replacement ECM for constant-torque blowers. Match the horsepower and the programming, then keep the old module until the new one actually runs.

Tester that tells you whether the ECM module is dead or the motor is. Cheaper than condemning a blower from the truck.

Eighteen-inch condenser fan blade, 1/2 inch bore, pitched for the usual residential top-discharge unit. A cracked blade will shake a new motor to death.

Ten by eight inch double-inlet blower wheel. Replace it when the fins are packed or the hub is wallowed out, not just the motor.

Puller for fan blades that have rusted to the shaft. Beats a screwdriver and a smashed bore.

Belly-band and bracket hardware for motors whose OEM mount is cracked or the wrong diameter. A motor without a solid mount is a return call.